Modular Serial 120 ohm RJ45 to RJ45 terminator Cable

Modular Serial 120 ohm RJ45 to RJ45 terminator Cable connections.
120 ohm RJ45 to RJ45 cable connections are as follows:
One end (RJ45) connects to the router.
The other end (RJ45) is connected to the network side device.

rj45 pinout usb to rj45 cable wiring diagram

structure appearance
Figure 7-13 Structure of 120-ohm RJ45-to-RJ45 cable (for E1 only)

120 ohm RJ45 to RJ45 cable

Table 7-17 lists the applicable board models for the 120-ohm RJ45-to-RJ45 cable.
Table 7-17 List of board models applicable to the 120-ohm RJ45-to-RJ45 cable

Schematic diagram of trunk extension cable

If the connection distance is long, you can use a 120 ohm relay extension cable to extend the cable.

The connection method of the 120-ohm trunk extension cable is to connect one end (RJ45) to the network port connector, and the other end (RJ45) to the peer network device, as shown in Figure 7-14.
Figure 7-14, 120-ohm relay extension cable connection diagram

Pin sequence
Table 7-18 lists the pin relationship of the 120-ohm RJ45-to-RJ45 cable.
Table 7-18, 120-ohm RJ45-to-RJ45 cable pin relationship table

technical indicators
Table 7-19, 120-ohm RJ45-to-RJ45 cable (for E1 only) technical specifications

illustrate
When it is necessary to extend the 120 ohm RJ45 to RJ45 cable. The user configures one network port connector (part number: 14080099) and one 120-ohm relay extension cable (part number: 04120278) at a ratio of 1:1 according to the number of cables.