Customized 1.5 FT 4 Prong to 3 Prong Dryer Adapter 30 Amp Outlet Plug Power Cord

Customized 1.5 FT 4 Prong to 3 Prong Dryer Adapter 30 Amp Outlet Plug Power Cord, 0-30P Male to 14-30R Female 250V Connector w/Ground Wire

Insulated shielded 30 Amp Outlet Plug Power Cord
1. Performance requirements for shielded power cords: basically the same as those for unshielded power cords of the same type.
2. Because it meets the requirements of the equipment for shielding (anti-interference performance), it is generally recommended to be used in occasions with medium-level electromagnetic interference. The plastic sheathed rubber power cord can be directly buried in the soil for laying.
3. The shielding layer should be in good contact with the connection device or grounded at one end, and the shielding layer should not be loosened, unbroken and not easily broken by foreign objects.
4. Structure
1) Conductive wire core: tin plating is allowed in some occasions;
2) The surface coverage density of the shielding layer should meet the standards or meet the user’s requirements;
The shielding layer should be braided or wound with tinned copper wire;
If the sheath should be extruded outside the shield, the shield is allowed to be braided or wound with soft round copper wire.
3) In order to prevent internal interference between wire cores or cable pairs, separate shielding structures for each wire core (or cable) can be produced.

Universal Rubber Sheath Rubber Power Cord
1. The universal rubber-sheathed rubber power cord has a wide range of applications. It is applicable to the general occasions of all kinds of electrical equipment that require mobile connection, including the connection of electrical mobile equipment used in various sectors of industry and agriculture.
2. According to the section size of the rubber power cord used and the ability to respond to mechanical external force, it can be divided into three types: light, medium and heavy. These three types of products all have requirements for softness and flexibility, but light rubber power cords have high requirements for softness, and must be light, small in size, and unable to withstand strong mechanical external forces;
The medium-sized rubber power cord has a certain degree of flexibility and can withstand considerable mechanical force;
Heavy-duty rubber power cord has high mechanical strength.
3. The rubber power cord sheath should be tight and firm with a certain degree of roundness. YQW, YZW, YCW type rubber power cords are suitable for field use (such as searchlights, agricultural electric plows, etc.), and should have better resistance to sunlight aging.
4. Structure
1) Conductive power wire core: twisted with soft copper wires, the structure is soft, and the surface of the large cross-section allows paper wrapping to improve the bending performance.
2) The insulation is made of natural styrene-butadiene rubber, and the aging performance of the insulation is good.
3) The rubber of outdoor products adopts neoprene or mixed rubber formula based on neoprene.