Console Router Configuration Cable DB9 Female to RJ45 Male

Console configuration cable DB9 Female to RJ45 Male connection relationship.
The connection relationship of Console configuration cables is as follows:

Console configuration cable structure

Router Cable DB9 Female to RJ45 Male

One end (RJ45) is connected to the console interface of the router.
The other end (DB9) is connected to the maintenance terminal, usually a computer.

Appearance and structure of console configuration cables
Figure 7-3, Console configuration cable structure

The pin sequence of the console configuration cable
Table 7-3 lists the pin relationship of the console configuration cable.
Table 7-3 Pin relationship of console configuration cables

illustrate
The TXD and RXD in the table are defined relative to the router, and should be connected to the RXD and TXD of the peer device (such as a computer) respectively.
The console configuration cable does not include RTS, CTS, DSR, and DTR signal lines, so it does not support hardware flow control.
Pins not described in the table are not connected.X1（RJ45）